RCA RCR311ST User Guide - Page 12

On-screen Menus (continued) SAT•CBL MENU VCR•DVD 1. TV 2. ON•OFF Press the component key whose menu you want to access. Press the MENU key. The illuminated ON•OFF key blinks, indicating you are in the Menu Mode. (BLINK) VOL & CH MENU OK 3. Use the VOL+/- and/or CH+/- keys to navigate through the on-screen menu system. 4. To make a selection from the on-screen menu, press the MENU or OK key to select the highlighted item. TIP: If the remote doesn't respond, check to see that the illuminated ON•OFF key is still blinking. Remember: it times out after 20 seconds. If this happens, just press the MENU key again, and then retry your selection. Exiting a Menu Mode The remote automatically times out of Menu Mode after 20 seconds of inactivity (no keys being pressed). At that time, the remote clears the displayed menu from the TV. If you want to exit the Menu Mode yourself, press the corresponding component key on the remote (TV, VCR•DVD, SAT•CBL). The illuminated ON•OFF key turns off and the remote is automatically set to control the component whose key you just pressed to leave the Menu Mode. For example, if the remote is in DVD Menu Mode, press the DVD key to exit the Menu Mode. The remote is now out of Menu Mode and is set to control the DVD. To control another component, simply press the component key for the unit you wish to control (TV, SAT, CBL). Sleep Timer (Select Models Only) This feature automatically turns off your TV at a duration you choose from 1 to 99 minutes. The Sleep Timer only works if you have found a code that controls your TV. The timing mechanism for the Sleep Timer is built into your universal remote control. To program the Sleep Timer, follow these steps. TV PROGRAMMING THE SLEEP TIMER SLEEP ON•OFF 1. Press and release the TV key. 2. Press and hold the SLEEP key for three seconds. The illuminated ON•OFF key turns on. 3. Release the SLEEP key. 4. Using the number keys, enter the ON•OFF desired time in minutes (from 1-99 minutes). To set the timer to a number under 10 minutes, first press 0 and then the desired number (e.g., 05 for (BLINK) ON•OFF five minutes). The illuminated ON•OFF key blinks with each keypress. 5. Once the second number is entered, the illuminated ON•OFF key turns off. 6. The Sleep Timer is now set. TIP: Any keypress other than the number keys is ignored. If you don't enter the sleep time within 10 seconds after pressing the SLEEP key, you must start over at step 1. The illuminated ON•OFF key blinks four times and then turns off, indicating your attempt to program the Sleep Timer has been unsuccessful. 12