RCA RCU 300 Owner/User Manual: RCU300T - Page 8

RCU300_US_IB_REVC 7/16/03 15:17 Page 8 Code Search Methods If your component's brand isn't listed in the Code List or you have tried all of the codes for your brand and the remote does not operate your component, use one of the Code Search methods below-Manual Code Search or Auto Code Search. Both Code Search methods search all of the codes because your component's code may be listed under another brand in the code list. Note: The Code Search method may take a long time because the remote searches all of the codes in its memory for the code which operates your component. Therefore, if your brand is listed in the Code List, use the Direct Entry method described on pages 5-7. Manual Code Search CODE INDICATOR 1. Turn on the component you SEARCH LIGHT want the remote to operate. 2. Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key. DBS• VCR• TV CABLE DVD (BLINK) 3. Press and release the component key that corresponds to the component you want the remote to operate (TV, VCR•DVD or DBS•CABLE). The indicator light blinks once and then remains lit. ON•OFF 4. Aim the remote at the component and press the ON•OFF key continuously until the component turns off. Important: Because there are so many codes, you may have to press the ON•OFF key many times-possibly up to 200 times. ENTER 5. When the component turns off, press the ENTER key to store the code. 6. Use Code Retrieval on the next page to identify the code for your component for future reference. Auto Code Search 1. Turn on the component you want the remote to operate. CODE INDICATOR SEARCH LIGHT 2. Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key. DBS• VCR• TV CABLE DVD 3. Press and release the component key that corresponds to the component you want the remote to operate (TV, VCR•DVD or DBS•CABLE). The indicator light blinks once and then remains lit. 8