RCA RP5020 User Manual - RP5020 - Page 9
Troubleshooting tips, Advanced operation - software
UPC - 044319503975
View all RCA RP5020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Advanced operation EN Cut Format (Caution! All data You can erase unwanted parts from your recording. inside the memory will be erased) 1. Select folder. A 2. Select file. AM 3. Start playback of the file with the SP unwanted part. 4. Press ERASE to A mark the start of AM the unwanted part, "CUT-S" shows on SP display. 5. Press ERASE to mark the endof the unwanted part, "CUT-E" shows on display. 6. Press ERASE again to confirm cutting (or press STOP to cancel) 7. "WAIT" will show on the display. 8. After the memory rearrangement You can format the internal memory when needed. (e.g. compatability problem, etc.) The procedures are as follow: 1. Turn on the unit. A 2. Press ERASE, "DELETE" MM DD will flash on the display. 3. Press and hold REC for DICT ONE 3 seconds, "FORMAT" will SP flash on the display. 4. Press and hold ERASE, A "WAIT" will show on the MM DD display, formatting is in process. DICT ONE 6. After the formatting is SP completed, the remain time of the selected memory will show on the display. completed, the unit will go to STOP mode. Tip: Inserting new segments, Tip: Make sure play all files is not selected. Inserting new segments, adding appendix adding appendix and cutting will only update the recorded time length, without changing recording time and date. and cutting cannot be performed when play all files is selected. 14 Troubleshooting tips Unit doesn't turn on Cannot activate the unit after EN • Check that batteries are properly pressing on keys inserted and not exhausted. • There may be software problems. • Make sure battery compartment door Remove the batteries to reset the unit. is properly closed. • Make sure LOCK function is not Recordable time becomes shorter activated. • You may have set the recording quality to 'High Quality', refer to Display keeps flashing when unit is section 'Setting Recording Quality'. off • You may not have set the time. Refer Cannot perform playback to section on Time Setting. • Make sure you have selected folder with recorded messages. Cannot record • Make sure LOCK function is not • Make sure LOCK function is not activated. activated. • Make sure memory is not full. Cannot erase recorded file(s) • You have recorded 99 files in one • Make sure you follow each step folder. Try record in a new folder. under section "Erasing Selected File" • If you select external memory, please carefully. ensure that an external memory card is properly inserted. Cannot stop recording when AVR ON Cannot show recording date and • If AVR ON sensitivity is too high (e.g. time during playback 8 - 10), recording may not be stopped • You may have not set the date and in noisy environment. time before recording. Refer to section 'Time Setting'. Cannot keep the saved setting • If the batteries are removed, saved No sound from speaker during settings may be removed. playback • Make sure volume is not set to 0. • Headphones should not be connected. Cannot edit • Make sure LOCK function is not activated. 15