RCA RP5030 User Manual - RP5030 - Page 21

RP5030 EN (B ver) 15/11/06 10:28 AM Page 22 Troubleshooting Tips Unit doesn't turn on Cannot edit • Check that batteries are properly • Make sure LOCK function is not EN inserted and not exhausted. activated. • Make sure battery compartment door is properly closed. Cannot activate the unit after • Make sure LOCK function is not pressing on keys activated. • There may be software problems. Remove the batteries to reset the Display keeps flashing when unit unit. is off • You may not have set the time. Recordable time becomes shorter Refer to section on Time Setting. • You may have set the recording quality to 'High Quality', refer to Cannot record section 'Setting Recording • Make sure LOCK function is not Quality'. activated. • Make sure memory is not full. Cannot perform playback • You have recorded 99 files in one • Make sure you have selected folder. Try record in a new folder. folder with recorded messages. • Make sure LOCK function is not Cannot show recording date and activated. time during playback • You may have not set the date and Cannot erase recorded file(s) time before recording. Refer to • Make sure you follow each step section 'Time Setting'. under section "Erasing Selected File" carefully. No sound from speaker during playback Cannot stop recording when AVR • Make sure volume is not set to 0. ON • Headphones should not be • If AVR ON sensitivity is too high connected. (e.g. 8 - 10), recording may not be stopped in noisy environment. Cannot keep the saved setting • If the batteries are removed, saved settings may be removed. 17