RCA RS3965SB RS3965SB Product Manual - Page 11

Radio Bluetooth Pairing Press SOURCE or TUNER on the remote control to select TUNER. Selecting tuner band Press AUTO PROG / BAND on the unit or TUNER on the remote control to select between AM and FM radio bands. Tuning to a station Press / to select frequencies. Press and hold to start auto searching for the next available station. Presetting stations Manually setting presets 1. Press / to access the desired frequency. 2. Press PROG button. The most recently accessed program location will be displayed. 3. If a different program location is preferred, press / to select the desired preset number (1-32). 4. Press PROG to store the selected frequency at that preset. Auto preset programming (FM only) Press and hold AUTO PROG / BAND for 2 seconds to scan stations in the FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing and holding the button for 2 seconds. You can stop the automatic scan by pressing TUN+/ TUN - button, but the erased stations cannot be recovered. Using presets Press PRESET to access the previous or next preset station. The display first shows the preset program number and after a few seconds, the frequency will be displayed. (e.g. P 01 is preset 1) Suppressing stereo signal Press FM ST. to select between ST ON and ST OFF for stereo FM stations. Before Bluetooth pairing, you should turn on the Bluetooth function of your other device (such as, mobile phone with Bluetooth function) and select RS3965SB. 1. Press SOURCE repeatedly on the unit or press the on the remote control to select BT (Bluetooth) mode. 2. The Bluetooth indicator blinks at slow speed and it auto searches for the last paired Bluetooth device in memory. 3. Once it enters the pairing status, the Bluetooth EN indicator will blinks at high speed. 4. Press PAIRING for 3 seconds to start pairing. • If the Bluetooth pairing is successful, the Bluetooth indicator will illuminate. • If the Bluetooth pairing is not fixed, the Bluetooth indicator will blink at slow speed. Please try pairing again. Note: If your Bluetooth device (such as, mobile phone) needs the password while pairing, please enter 4-digit number: 0000. Enjoy the music through Bluetooth • Press to begin or pause playback. • Press / to select a specific track. • Press and hold / to start moving backward/forward at high speed. LINE IN/AUX IN Play external sound through the speaker system Press SOURCE on the unit repeatedly to select LINE IN or AUX mode. Or press LINE IN/AUX on the remote control to change to LINE IN/AUX mode from CD, TUNER or BT mode; press LINE IN again to change to AUX mode. Suggest using Ø3.5mm LINE IN jack for mp3 player and AUX IN jacks for auxiliary equipment such as DVD, VCR or PC. - 10 -