RCA RS3965SB RS3965SB Product Manual - Page 5
Getting Started - audio
View all RCA RS3965SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Getting Started Unpacking the system You should have the following: • one main unit (with three speakers) • one remote control (with 2 AAA batteries) • one AM loop antenna • user manual Using FM and AM antennas Before you use your audio system, you'll want to make sure both the FM and AM antennas are positioned properly. Uncoil the FM antenna at the back of the unit, making sure it is fully extended (you may even want to tape it to the wall behind the unit if possible, the higher the better). Connections Back view 1. AM loop antenna jack 2. FM pigtail antenna 3. Speaker jacks 4. AUX IN jacks You'll also need to connect the AM antenna loop to the back of the unit if you listen to AM stations. Rotate the AM loop antenna for better reception. EN AM loop antenna (included) FM antenna To an AC outlet Jacks for external sound input Connecting speakers Each main speaker has a black/red wire, and subwoofer has two pairs of black/purple wires. When connecting the speakers, match the red/ purple wires to the red/purple jacks and the black wires to the black jacks on the main unit. 1 2 Installation To ensure sufficient ventilation, keep the spacing shown below free from other surfaces: 4" 4" 4" 4" 2" Push speaker terminal tab down to insert wire. Release tab to lock wire in the terminal. Front view Side view NOTE: Make sure the insulation is completely removed from the ends of the speaker wires at all connection points. - 4 -