RCA l46wd250 User Guide & Warranty - Page 42

Using the TV's Menu System Preferences Go back Ch. Number Display Language Maximum TV volume Power Save Mode English... Message Go back Display Start Time Recurrence Stop Time Erase Message Message 6:00PM... 30min Preferences Ch. Number Display Turn this feature on if you want the channel number always available when you press the CH+ or CH- button. Language Lets you select your preferred language for the menus: English, Español or Français. Maximum TV volume This feature is intended to prevent volume from being turned up too loudly. Set the volume at the loudest level you'd want to hear. Press and hold OK to hear the maximum volume you set. Power Save Mode If no signal is detected from the VGA input jack for 5 minutes, puts the TV in power save mode. Message Set a message that appears at the bottom of the TV screen. Press the CLEAR button to clear the message. If Display is turned on, the message appears when the TV is turned back on after being turned off. Display Turns on or off to display a message on the TV. Start Time Set the time you want to display the message. Not available if the time hasn't been set in the Time menu. Recurrence Set how often to display the message- 10min- 60 min. Stop Time Set the time you want to the message to stop. Erase Message Clears all lines of text you've entered. Message Press OK to enter a message. Enter up to 4 lines of text- 25 characters per line. Press the right arrow button to start entering text on a line, then press the up and down arrow buttons to change characters. Press OK when you're done entering text for a line. Parental Control Menu The Parental control menu was explained in Chapter 3. Go to page 29 for more information. Time Go back Sleep Timer Auto Time Channel Enter Time Wake up Timer Wake up Time Wake up Channel Turn off Timer Turn off Time 03:00 Zzz 12 PBS 8:25PM Daily... 8:00AM 12 Once... 10:00PM Time Menu Sleep Timer Lets you set the TV to turn off after a given amount of time. Auto Time Channel Choose your PBS station to have the TV set the time for you. Wait about one minute for the time to be set. Enter Time If you didn't set the time reference channel, enter the current time manually. If it is eight o'clock, for example, you must first enter the number zero, then number eight. Use the OK button to choose between AM and PM. Wake up Timer Lets you set the TV to turn itself on. Note: The Wake up timer is available only when the time has been set. 42 Chapter 4