RedMax EBZ7500 Owners Manual - Page 10
Set up
View all RedMax EBZ7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
EBZ7500/RH 6. Set up F1 F2 F3 F4 [EBZ7500RH] F5 [EBZ7500RH] US-8 ■ BLOWER 1. Connect the blower and pipe with flexible hose. Clamp both ends of the flexible hose securely with the hardware supplied with the unit. (F1) 2. When connecting the pipe (2) with flexible hose, set "UP" mark on the pipe facing upward. (F1) 3. Align the protrusion and the groove provided on the tube ends and twist the tube until connection is locked up. (F2) 4. Apply grease to the pipes if necessary. (1) Flexible hose (2) Pipe (3) Clamp (4) Pipe, straight (5) Pipe, end (6) Grip assy [EBZ7500] (7) Bolt NOTE A light lubricant may be used to ease assembly of flexible pipe to blower elbow. NOTE "Pipe, end" can be connected with "Pipe, straight" in two opposing directions, (a & b) as described in (F3). a: Operator can feel "Light-weight body" than usual due to the air stream. b: Operator can feel "Higher performance" due to the air stream. ■ THROTTLE LEVER [EBZ7500RH] • Set up the clamp to the swivel and tighten the screw on the clamp. (1) Cruise Control Ignition Switch Lever (2) Pipe (3) Knob bolt ■ THROTTLE CABLE [EBZ7500RH] • Use the clamp to fasten the colgate tube containing the throttle cable and the power cable to the hose. (1) Clamp (2) Cable (3) Flexible hose