RedMax TR2350S Owners Manual - Page 11

Set up

Get RedMax TR2350S PDF manuals and user guides View all RedMax TR2350S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

6. Set up ■ CONNECTING SWITCH WIRES • Connect the switch wires between the engine and the main unit. Pair the wires of the same color. SE1 ■ INSTALLING HANDLE • Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. (SE1) (1) (1) About 11 inches (28cm) SE2 ■ INSTALLING DEBRIS GUARD • Put the debris guard on the gear box, attach it with the screws and hardware provided. (SE2) ■ INSTALLING CUTTING HEAD (SE3) SE3 1. While locking the gear shaft, by inserting the supplied tool into the upper holder on the gear box, loosen and remove the hexagon nut(left- handed) 2. Fit the line head assembly to the gear shaft over the holders. Hand-tighten it securely. IMPORTANT You need not holder (B) and nut when installing the cutting head. TR2350S U S US-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
US-9
TR2350S
U
S
6. Set up
(1)
SE1
SE2
SE3
■
CONNECTING SWITCH WIRES
•
Connect the switch wires between the
engine and the main unit. Pair the wires
of the same color.
■
INSTALLING HANDLE
•
Mount the handle to the shaft tube and
clamp it at a location that is comfortable
to you. (SE1)
(1) About 11 inches (28cm)
■
INSTALLING DEBRIS GUARD
•
Put the debris guard on the gear box,
attach it with the screws and hardware
provided. (SE2)
■
INSTALLING CUTTING HEAD (SE3)
1.While locking the gear shaft, by
inserting the supplied tool into the
upper holder on the gear box, loosen
and remove the hexagon nut(left-
handed)
2. Fit the line head assembly to the gear
shaft over the holders. Hand-tighten it
securely.
You need not holder (B) and nut when
installing the cutting head.
IMPORTANT