Reebok Crosswalk Rt 5.0 Treadmill Canadian English Manual - Page 11

9. Insert the end of a Crosswalk Arm (121) into the hole in the top of a resistance mechanism. Make sure that the bend in the Crosswalk Arm is positioned as shown. Tighten a #8 x 3/4" Screw (1) into the resistance mechanism and the Crosswalk Arm (121) from the direction shown. Then, press a Small Cap (119) into the hole for the Screw. Attach the other Crosswalk Arm (121) as described above. Carefully lower the Crosswalk Arms (121) toward the Walking Belt (49). 9 Bend 121 Hole 119 1 Resistance Mechanism 49 121 Resistance Mechanism 1 119 10. Slide the Right Upright Cover (86) onto the Right Upright (85). Remove the tie from the 5/16" 10 Cage Nut (38) in the Right Handrail (83). If neces- sary, press the Cage Nut back into place. Hold the Right Handrail (83) near the Right Upright (85). Insert the Upright Wire (87) through the bracket on the bottom of the Right Handrail. Pull the Upright Wire out of the end of the Right Handrail. Attach the Right Handrail (83) to the Right Upright (85) with two 5/16" x 1" Flat Head Bolts (3) and a 5/16" x 1" Bolt (4) with a 5/16" Star Washer (13); do not fully tighten the Bolts yet. Attach the Left Upright Cover (not shown) and the Left Handrail (not shown) in the same way. Note: There is no wire on the left side. 87 Bracket 3 83 38 4 13 86 85 11