Reebok Crosswalk Rt 5.0 Treadmill Canadian English Manual - Page 14

15. Hold the Right Upright Cover (86) against the console assembly. Align the holes in the Right 15 Upright Cover with the holes in the Right Upright (85). Attach the Right Upright Cover with two #8 x 3/4" Screws (1). Attach the Left Upright Cover (80) to the Left 86 Upright (84) in the same way. See steps 4 and 6. Tighten the four 3/8" x 4" Bolts (7) and the two 3/8" x 1 1/2" Bolts (14). 1 85 80 Console Assembly 1 84 16. Raise the Crosswalk Arms (121) (only one is 16 shown). Raise the Frame (55) to the position 55 shown. Have a second person hold the Frame until this step is completed. 10 8 Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. 51 Attach the upper end of the Storage Latch (51) to the bracket on the Frame (55) with a 3/8" x 2" Latch Bolt (8) and a 3/8" Nut (10). Knob 121 Attach the lower end of the Storage Latch (51) to the Base (95) with a 3/8" x 1 3/4" Bolt (6). Note: It may be necessary to move the Frame (55) back and forth to align the Storage Latch with the Base. Large Barrel 95 Lower the Frame (55) (see HOW TO LOWER THE TREADMILL FOR USE on page 25). 6 17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28). 14