Reebok Cyc31 Uk Manual - Page 11
Mode Button
View all Reebok Cyc31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Next, repeat- edly press the mode button until a "P" appears in the display. (Make sure that there is not an arrow under the scan symbol.) Mode Button When your pulse is detected, the heart-shaped indicator will flash each time your heart beats. After a few seconds, three dashes will appear and your pulse will be shown. For the most accurate pulse measure- ment, wait for about ten seconds. If your pulse is not shown, rub your ear lobe and reposition the pulse monitor. It may be helpful to stop pedalling whilst you measure your pulse. The scan mode- Repeatedly press the mode button until an arrow Mode Arrow appears under the scan symbol. When the scan mode is selected, the console will display the pulse, speed, time, distance, fat calories, and calories modes, for 5 seconds each, in a repeating cycle. The speed, time, distance, fat calories, or Mode calories Arrow mode- Repeatedly press the mode button until an arrow appears below or above the desired mode symbol. Make sure that there is not an arrow under the scan symbol. If desired, press the on/reset button to reset the display. 5 Turn off the power To turn off the power, simply wait for about six minutes. If the pedals are not turned and the buttons are not pressed for six minutes, the power will turn off automatically. 11