Reebok Cyc31 Uk Manual - Page 8
M6 x 16mm Hex Screws 29 and four M8 Flat
View all Reebok Cyc31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
7. Attach the Seat (12) to the Seat Post (11) with four 7 M6 x 16mm Hex Screws (29) and four M8 Flat Washers (18). Note: The Hex Screws and Flat Washers may be pre-attached to the Seat. Using an adjustable wrench, remove the Seat Knob Assembly (31) from the Frame (1). Insert the Seat Post (11) into the Frame (1). Slide the Round Collar (13) down the Seat Post and press it into the Frame. Secure the Round Collar to the Frame with an M6 x 10mm Screw (26). Reattach the Seat Knob Assembly (31) to the Frame (1). 11 13 1 8. Identify the Left Pedal (40) (the threaded shaft on each Pedal is marked with an "L" for "Left" or an "R" for "Right"). Using an adjustable wrench, tighten the Left Pedal counterclockwise into the left Crank Arm (34). Tighten the Right Pedal (not shown) clockwise into the right Crank Arm (34). 8 Threaded Shaft 34 40 12 18 29 26 31 9. Make sure that all parts are properly tightened before you use the exercise cycle. 8