Reebok Rt 245 Bike English Manual - Page 6
Upper Wire Harness 16.
View all Reebok Rt 245 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4. While another person holds the Handlebar (7) near 4 the Handlebar Post (6), feed the Upper Wire Harness (16) and the Pulse Sensor Wire (45) up through the indicated hole in the Handlebar. Attach the Handlebar to the Handlebar Post with three M8 x 25mm Button Screws (19) and three M8 Split Washers (28). Hole 45 7 6 28 19 16 28 19 5. The Console (9) requires four "D" batteries (not 5 included); alkaline batteries are recommended. Press the indicated tab on the battery cover and 9 remove the cover. Press four batteries into the battery clips; make sure that the batteries are orient- Battery Cover ed as shown by the markings inside of the bat- tery clips. Then, reattach the battery cover. 6. Insert the Bookrack (8) into the slots in the Console 6 (9). Attach the Bookrack to the Console with two M4 x 25mm Screws (20). Be careful not to pinch the wires in the Console. Batteries 8 9 7. While another person holds the Console (9) near 7 the Handlebar (7), connect the Pulse Sensor Wire (45) and the Upper Wire Harness (16) to the corre- sponding wires on the Console. Insert all excess wiring down into the Handlebar Post (6). Attach the Console (9) to the Handlebar (7) with four M4 x 16mm Screws (21). Be careful not to pinch the Pulse Sensor Wires (45) or the Upper Wire Harness (16). 20 7 21 45 9 Console Wires 16 21 6 6