Reebok Rt 300 Bike English Manual - Page 16
Maintenance And Troubleshooting
View all Reebok Rt 300 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
MAINTENANCE AND TROUBLESHOOTING Inspect and properly tighten all parts of the exercise cycle regularly. The exercise cycle can be cleaned with a soft, damp cloth. To prevent damage to the console, keep liquids away from the console and keep the console out of direct sunlight. TIGHTENING THE PEDALS For best performance, regularly tighten both pedals. CONSOLE TROUBLESHOOTING If the console display becomes dim, the batteries should be replaced. See assembly step 6 on page 7 for replacement instructions. If the console does not display your heart rate when you use the handgrip pulse sensor, see step 5 on page 12. HOW TO LEVEL THE EXERCISE CYCLE If the exercise cycle does not sit flat on your floor, turn one or both of the leveling feet until the exercise cycle is level. Leveling Feet HOW TO ADJUST THE BELT If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest setting, the belt may need to be adjusted. To adjust the belt, the pedals and side shields must first be removed. Using an adjustable wrench, turn the right pedal counterclockwise and remove it. Then, turn the left pedal counterclockwise and remove it. Remove the screws from the right side shield, and then carefully remove the side shields. Loosen, but do not remove, the three indicated screws (A). Insert the shaft of a screwdriver downward 28 between the Pulley (22) and the idler (B). Pull the top of the screwdriver 22 B toward the rear A of the exercise cycle until the Belt (28) is tight. Then, tighten the three screws. Reattach the side shields, and then reattach the pedals. To attach the pedals, turn the right pedal clockwise and turn the left pedal counterclocKwise. 16