Reebok Stride Select Rl 6.0 Elliptical English Manual - Page 23
How To Adjust The Drive Belt
View all Reebok Stride Select Rl 6.0 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to the highest level, the drive belt may need to be adjusted. To adjust the drive belt, first unplug the power adapter. Using a flat screwdriver, release the tabs on the Access Cover (20) and pry the Access Cover upward off the elliptical. Then, remove the M4 x 16mm Round Head Screws (134) and the M4 x 42mm Screws (120) from the Right and Left Shields (18, 19). (Note: Not all Screws are shown. Be sure to note which size Screws come from which holes.) Then, carefully remove the Left Shield. Loosen the Pivot Screw (97). Tighten the Belt Adjustment Screw (85) until the Drive Belt (38) is tight. When the Drive Belt is tight, tighten the Pivot Screw. 13 134 120 50 46 120 20 18, 19 38 97 85 Next, lift the Latch (50) on the underside of the Left Pedal Arm (13), and then lift the Left Pedal Arm off the left Pedal Arm Sleeve (46). When you are finished, reattach the left shield, replace the left pedal arm, and reattach the access cover. Then, plug in the power adapter. 23