Reebok Stride Select Rl 6.0 Elliptical English Manual - Page 9

7. Apply grease to the axle on the right Crank Arm (39). 7 Orient a Pedal Arm Sleeve (46) so that the flat side is facing the elliptical. Slide the Pedal Arm Sleeve onto the axle on the right Crank Arm (39). Attach the Pedal Arm Sleeve (46) with an M8 x 25mm Patch Screw (121), a Large Axle Cover (113), and an M8 Washer (95). Tip: Avoid damaging the Large Axle Cover when tightening the Patch Screw. Repeat this step on the other side of the elliptical. 8. See drawing 8a. Locate the Pedal Arm Roller (32) on the Left Pedal Arm (13). 8a Set the Pedal Arm Roller (32) on the left side of the Ramp (130). See drawing 8b. Pull upward on the Latch (50) on the Left Pedal Arm (13). Press the Left Pedal Arm (13) onto the left Pedal Arm Sleeve (46). Make sure that the Left Pedal Arm latches into place. Repeat this step on the other side of the elliptical. 8b Grease 39 46 95 113 Flat 121 Side 13 32 130 13 46 50 9