Reebok T7.90 Elliptical English Manual - Page 7
Identify the Left Pedal 34 and the Left Pedal
View all Reebok T7.90 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Attach the Front Ramp Cover (6) to the 3 Ramp (5) with four M4 x 16mm Screws (97). 6 Slide an M10 x 25mm Washer (87) onto an M10 x 20mm Button Screw (111). Tighten the Button Screw into one end of the Ramp Axle (72). Apply a small amount of the included 9 grease to the Ramp Axle. 62 Orient the Ramp (5) as shown. Align the lower end of the Ramp with the welded tube on the Frame (1). Insert the Ramp Axle (72) into the Ramp and the welded tube. Then, pull the Ramp Knob (9), lower the Ramp, and engage the Ramp Pin (62) in one of the three adjust- 97 ment holes in the front of the Frame. Slide an M10 x 25mm Washer (87) onto an M10 x 20mm Button Screw (111). Tighten the Button Screw into the open end of the Ramp Axle (72). Adjustment Holes 5 87 111 72 1 87 111 Grease 4. Identify the Left Pedal (34) and the Left Pedal Arm (32), which are marked with stickers. Attach the Left Pedal (34) to the Left Pedal Arm (32) with two M6 x 62mm Screws (108), two M6 x 35mm Screws (109), and four M6 Split Washers (102). Attach the Right Pedal (not shown) to the Right Pedal Arm (not shown) in the same way. 4 34 32 102 109 108 102 109 102 7