Reebok V 6.80 Treadmill English Manual - Page 7

1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip 87 the treadmill onto its left side. Partially fold the Frame (52) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the shipping tie securing the Wire Harness (87) to the Base (84). Locate the plastic tie in the indicated hole in the Base, and use the tie to pull the Wire Harness out of the hole. Attach two Base Feet (86) to the Base (84) in the locations shown with two #8 x 1" Tek Screws (1) and two Base Foot Spacers (83). 83 52 86 1 Then, attach the other two Base Feet (86) with two #8 x 1" Tek Screws (1). 2. See the inset drawing. Cut the plastic tie near the Wire Harness (87). 2 Attach a Wheel (85) to the Base (84) with a 3/8" x 2" Bolt (6) and a 3/8" Nut (7). Do not overtighten the Nut; the Wheel must turn freely. 86 83 1 Plastic Tie 6 Hole 86 1 84 86 1 84 85 7 3. Identify the Right Upright (77) and the Right Upright Spacer (88), which are marked with stickers. Insert the Wire Harness (87) through the Right Upright Spacer as shown. Then, set the Right Upright Spacer on the Base (84). Have a second person hold the Right Upright (77) near the Base (84). See the inset drawing. Tie the wire tie in the Right Upright securely around the end of the Wire Harness (87). Then, pull the other end of the wire tie until the Wire Harness is routed completely through the Right Upright. 3 87 87 7 Wire Tie 77 Wire Tie Cut 87 77 87 88 84