Ricoh 3245 Operating Instructions - Page 126

User Tools (Copier / Document Server Features) Note ❒ Default: With Image Rotation ❒ [With Image Rotation] Use to copy when using the Auto Tray Switching function. ❒ [Without Image Rotation] Only copies with Auto Tray Switch- ❖ Change Initial Mode You can select standard mode or Program No.10 as the mode effective when power is turned on, or modes are cleared. Note ❒ Default: Standard ing if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size or in the same orientation, copying is interrupted and the message "Load paper." is displayed. ❖ Max. Copy Quantity The maximum copy quantity can be set between 1 and 999. Note ❒ Default: 999 Sheet(s) ❒ [Off] When a paper tray runs out ❖ Tone: Original remains of paper, copying is interrupted The beeper (key tone) sounds if 5 and the message "Load pa- you forget to remove originals af- per." is displayed. ter copying. General Features P.2/5 ❖ Duplex Mode Priority You can select the type of the Duplex function effective when the power is turned on, or modes are cleared. Note ❒ Default: • Metric version: 1 Sided→1 Sided • Inch version: 1 Sided→2 Sided ❖ Copy Orientation in Duplex Mode You can set the copy orientation when making two-sided copies. Note ❒ Default: Top to Top ❖ Original Orientation in Duplex Mode You can set the original orientation when making two-sided copies. Note ❒ Default: On ❒ If Panel Tone in User Tools (System Settings) is [Off], the beeper does not sound, whatever the Tone: Original remains setting. See "Panel Tone" in "General Features", General Settings Guide. ❖ Job End Call You can choose to have the beeper sound when copying is complete. Note ❒ Default: On ❒ If Panel Tone of User Tools (System Settings) settings is [On], the machine beeps to notify you that it did not complete a job for reasons such as: the paper tray ran out of paper, or a paper jam occurred. Note ❒ Default: Top to Top 112