Ricoh Aficio MP 2000 General Settings Guide - Page 31

Network Settings Settings Required to Use Scan to Folder Function This section lists the settings required for sending file. 1 Ethernet This section lists the settings required for sending file with Ethernet cable. For details about how to specify the settings, see "Interface Setting" and "File Transfer". Menu User Tool Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communictn. Interface Settings/Network Permit SSL/TLS Comm. Interface Settings/Network Host Name File Transfer Default User Name/PW(Send) Setting Requirements Necessary Necessary As required As required As required As required Necessary Necessary As required As required As required As required Note ❒ In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.47 "Interface Settings" p.53 "File Transfer" 23