Ricoh Aficio MP 2000L Network Guide - Page 12

Connecting the Network Cable to the Network Connecting to the Ethernet Interface C Connect the network interface ca- ble to the 10BASE-T/100BASE-TX port. The network interface board supports 10BASE-T or 100BASE-TX connec- tions. 2 A Turn off the main power switch. Important ❒ Make sure the main power is off. See "Turning On the Power", Copy Reference. B Loop the network interface cable and attach the ferrite core. ANY001S D Turn on the main power switch. Note ❒ The network interface cable loop should be about 10 cm (4")(A) from the end of the cable (closest end to the printer). The ferrite core at the end of the cable should be a ring type. 1. 2. AAW022S1 1. Indicator (green) Remains green when the machine is properly connected to the network. 2. Indicator (yellow) Turns yellow when 100 BASE-TX is operating. Turns off when 10 BASE-T is operating. AAW026S1 6