Ricoh Aficio MP 2000L Network Guide - Page 21

Printing without a Print Server Configuring the port settings A In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties]. B Click the [Details] tab, and then click [Port Settings...]. The TCP/IP Port Type P10001 Configuration dialog box appears. E In the [Printer Name or IP Address] box, enter the printer name or IP address, and then click [Next]. F In the [Add Standard TCP/IP Printer Port Wizard] dialog box, click [Finish]. G Click [OK]. H Check the location for the select- ed printer, and click [Close]. • You can select either Raw or LPR port to print. Using LPR Port • You can change the IP address of the Port. This describes how to change the port settings under Windows 2000 when a Note printer driver has been installed. 5 ❒ If the IP address of the machine is changed, you must change the port settings also. • Both Raw and LPR support SNMP. Important ❒ Do not change Port Number, Timeout, and Queue Name. A In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties]. B Click the [Ports] tab, and then click [Add Port]. C Click [LPR Port], and then click [New Port]. Using Standard TCP/IP Port This describes how to change the port settings under Windows 2000 when a printer driver has been installed. A In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click [Properties]. B Click the [Ports] tab, and then click [Add Port]. D In the [Name or address of server pro- viding lpd] box, enter the printer's IP address. E In the [Name of printer or print queue on that server] box, enter "lp", and then click [OK]. F Click [OK]. G Check the location for the select- ed printer, and click [Close]. C Click [Standard TCP/IP], and then click [New Port]. D In the [Add Standard TCP/IP Printer Port Wizard] dialog box, click [Next]. 15