Ricoh Aficio MP 2000L Network Guide - Page 14

Setting Up the Machine on a Network Network Configuration Any change you make with User Tools remains in effect even if the main power switch or operation switch is turned off, or the {Clear Modes} key is pressed. A Press the {User Tools/Counter} key. B Select [Interface Settings] using the {U} or {T} key, and then press the {OK} key. C Select the setting you want to change, and then press the {OK} key. Configuring the network using the 3 control panel D Change the setting, and then press the {OK} key. Note ❒ Operations for Interface Settings are different from normal operations. After using User Tools, press the {User Tools/Counter} key to exit. Note ❒ Press the {Escape} key to cancel the setting. E Press the {User Tools/Counter} key. ❒ If the key operator code has been set, the key operator code entry screen appears. Enter the code, and then press the {OK} key. For details about the key operator code, see General Settings Guide. Configuring the network using other utilities As well as using the control panel to make network settings, utilities such as a Web browser can also be used. The following table shows available settings: Note ❒ ❍ Indicates machine settings can be changed. ❒ - Indicates the setting cannot be changed from that device. Name on the control panel Interface Set- Network tings IP Address Auto-Obtain (DHCP) Specify IP Add. Subnet M Mac Add. Gateway Address Effective Protocol Ethernet Speed Web browser 8