Ricoh Aficio MP 6000 S/P General Settings Guide - Page 113
Input/Output, Switch to Batch, SADF Auto Reset, Rotate Sort: Auto Paper Continue
View all Ricoh Aficio MP 6000 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Input/Output Input/Output This section describes the user tools in the Input/Output menu under Copier/Document Server Features. Default settings are shown in bold type. ❖ Switch to Batch You can select to have Batch mode or SADF mode displayed when you press the [Special Original] key. The default setting is Batch. 3 ❖ SADF Auto Reset In SADF mode, an original must be set within a specified time after the pre- vious original has been fed. You can adjust this time from 3 to 99 seconds in increments of 1 second. The default setting is 5 second(s). ❖ Rotate Sort: Auto Paper Continue Specify to continue copying when paper of the required orientation has run out during rotate sort. The default setting is Off. • On Copying continues using copy paper of a different orientation. The copy job will finish even if you have left the machine. • Off When paper of the required orientation runs out, the machine stops copying and prompts you to supply copy paper. After you have loaded paper, the machine will continue copying. ❖ Copy Eject Face Method in Glass Mode You can specify the way in which copies are delivered when copying an original placed on the exposure glass. The default setting is Face Up. ❖ Copy Eject Face Method in Bypass Mode You can specify the way in which copies are delivered when copying in Bypass mode. The default setting is Face Up. 103