Ricoh Aficio MP 6000 S/P General Settings Guide - Page 31
Settings Required to Use Scan to Folder Function, Ethernet
View all Ricoh Aficio MP 6000 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Network Settings Note ❒ As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒ [LAN Type] is displayed when optional wireless LAN interface board is in- stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. 1 ❒ When setting [POP before SMTP] to [On], also make setting for [Reception Protocol] and [POP3 / IMAP4 Settings]. ❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail Communication Port]. Reference p.49 "Interface Settings" p.56 "File Transfer" Settings Required to Use Scan to Folder Function This section lists the settings required for sending files. Ethernet This section lists the settings required for sending files with an Ethernet connection. For details about specifying the settings, see "Interface Settings" and "File Transfer". Heading Setting Item Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network Ethernet Speed Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communication Interface Settings/Network Permit SSL / TLS Communication Interface Settings/Network Host Name File Transfer Scanner Resend Interval Time File Transfer Number of Scanner Resends Setting Requirements Necessary Necessary As required As required As required As required Necessary As required Necessary As required As required As required As required As required 21