Ricoh Aficio MP 6000 S/P General Settings Guide - Page 66
File Transfer, Delivery Option, Capture Server IPv4 Address, Fax RX File Transmission
View all Ricoh Aficio MP 6000 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
System Settings File Transfer This section describes the user tools in the File Transfer menu under System Settings. Default settings are shown in bold type. 2 ❖ Delivery Option Enables or disables sending stored or scanned documents to the ScanRouter delivery server. The default setting is Off. Set this option when specifying whether or not to use the ScanRouter delivery server. If you do, you will have to re-register I/O devices in the ScanRouter delivery server. ❖ Capture Server IPv4 Address Specify the capture server IPv4 address. This setting appears when the media link board is installed, and that the capture function is being used by the ScanRouter delivery server. ❖ Fax RX File Transmission Specify how to deliver fax files received via the different lines. • Setting per Line • Line 1 • Line 2 • Line 3 • E-mail • IP-Fax The lines appear according to the operating environment. • RX File Delivery Specifies whether or not received fax documents are sent to the ScanRouter delivery software for each fax line. The default setting is Do not Deliver. • Print at Delivery Specify whether or not received fax documents sent to the ScanRouter delivery software should also be printed at the same time. The default setting is Do not Print. • File to Deliver Specify whether all received fax documents or only received fax documents that include delivery codes (ID or SUB/SEP codes) are sent to the ScanRouter delivery software. The default setting is Print File. 56