Ricoh Aficio MP 6000 S/P General Settings Guide - Page 59
Interface Settings, Network
View all Ricoh Aficio MP 6000 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Interface Settings Interface Settings This section describes the user tools in the Interface Settings menu under System Settings. Network 2 This section describes the user tools in the Network menu under Interface Settings. Default settings are shown in bold type. ❖ Machine IPv4 Address Before using this machine in the network environment, you must configure the IP address and subnet mask. When you select [Specify], enter the [Machine IPv4 Address] and [Sub-net Mask] as "xxx.xxx.xxx.xxx" ("x" indicates a number). When you select [Specify], be sure not to set the same [Machine IPv4 Address] as that of another machines on the network. The physical address (MAC Address) also appears. ❖ IPv4 Gateway Address A gateway is a connection or interchange point between two networks. Configure the gateway address for the router or host computer used as a gateway. The default setting is 000.000.000.000 ❖ Machine IPv6 Address You can specify the machine's IPv6 network address. • Link-local Address The machine's specified link-local address appears. • Manual Configuration Address The machine's manually configuration address appears. • Stateless Address: 1-5 The specified stateless address appears. ❖ IPv6 Gateway Address The machine's IPv6 gateway address appears. ❖ IPv6 Stateless Address Autoconfiguration You can set "IPv6 Stateless Address Autoconfiguration" to "Active" or "Inactive". The default setting is Active. 49