Ricoh Aficio MP C3500 EFI Troubleshooting Guide - Page 60
Alert Messages, This describes the machine Alert messages.
View all Ricoh Aficio MP C3500 EFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Troubleshooting When Using the Printer Function Alert Messages This section describes the machine Alert messages. Message Cause Solution Cannot connect with • IEEE 802.11b interface Turn off the machine and check the the wireless card. unit was not inserted IEEE 802.11b interface unit is inserted Turn the main power when the machine correctly. Then, turn the machine on switch off, then was turned on, or it again. If the message appears again, call check the card. was pulled out after your service representative. / Problems with the wireless card. the machine turned on. / Problems with the • The settings are not 4 wireless board. updated although the unit is detected, or errors are found while accessing the unit. Problems with IEEE 1394 Board. An error may have occurred in the IEEE 1394 board. Turn off the main power switch, and back on again. If the message appears again, contact your service representative. Problem with Hard An error has occurred in Turn off the main power switch, and back Disk. the hard disk drive. on again. If the message appears again, contact your service representative. The entered pass- The password of the en- Enter the correct password. word is incorrect. crypted PDF file has been entered incorrectly. USB has a problem. An error has occurred in Turn off the main power switch, and back the USB interface. on again. If the message appears again, contact your service representative. Hardware Problem: An error has occurred in Turn off the main power switch, and back Ethernet the Ethernet board. on again. If the message appears again, contact your service representative. You do not have the privileges to use this function. Use of this function is re- Contact the administrator. stricted. Authentication has failed. • The login user name • Check your login user name and or password entered password. is incorrect. • Contact the administrator. • The machine current- ly cannot perform au- thentication. Parallel I/F board An error has occurred in Turn off the main power switch, and back has a problem. the parallel interface on again. If the message appears again, board. contact your service representative. Printer font error. An error has occurred in Contact your service representative. the font settings. 52