Ricoh Aficio MP C3502 Manuals - Page 201
Changing the Paper Size, Paper, Specifications and Adding Paper
View all Ricoh Aficio MP C3502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
When Messages Are Displayed on the Control Panel Message Causes Solutions "Hardware Problem: HDD" An error has occurred in the hard disk. Turn off the main power switch, and then back on again. If the message appears again, contact your service representative. "Hardware Problem: Parallel I/F" An error has occurred in the IEEE 1284 interface board. Turn off the main power switch, and then back on again. If the message appears again, contact your service representative. "Hardware Problem: USB" An error has occurred in the USB interface. Turn off the main power switch, and then back on again. If the message appears again, contact your service representative. "Hardware Problem: Wireless Card" (A "wireless LAN board" or "Bluetooth interface unit" is referred to as a "wireless card".) The wireless LAN board can be accessed, but an error was detected. Turn off the main power switch, and then confirm the wireless LAN board is inserted correctly. And then, turn on the main power switch again. If the message appears again, contact your service representative. "Hardware Problem: Wireless Card" (A "wireless LAN board" or "Bluetooth interface unit" is referred to as a "wireless card".) • The Bluetooth interface unit was connected while the machine was turned on. • The Bluetooth interface unit was removed while the machine was turned on. Turn off the main power switch, and then confirm the Bluetooth interface unit is inserted correctly. And then, turn on the main power switch again. If the message appears again, contact your service representative. "Load following paper in n. To cancel job, press [Job Reset]." (A figure is placed at n.) The printer driver settings are incorrect or the tray does not contain paper of the size selected in the printer driver. Check that the printer driver settings are correct, and then load paper of the size selected in the printer driver into the input tray. For details about how to change the paper size, see "Changing the Paper Size", Paper Specifications and Adding Paper . 199