Ricoh Aficio SP 3510SF User Guide - Page 302
PBX Access Number, Function Priority, System Auto Reset Timer, Energy Saver Mode
View all Ricoh Aficio SP 3510SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 302 highlights
7. Configuring the Machine Using the Control Panel Default: [PSTN] • PSTN • PBX PBX Access Number Specifies the dial number to access the outside line when the machine is connected to a PBX. Make sure that this setting matches the setting of your PBX. Otherwise, you may not be able to send faxes to outside destinations. Default: 9 • 0 to 999 Function Priority Specifies the mode that is activated when the power is turned on, or if the time specified for [System Auto Reset Timer] elapses without activity while the initial screen of the current mode is displayed. Default: [Copier] • Copier • Facsimile • Scanner System Auto Reset Timer Sets the machine to return to the mode specified in [Function Priority]. Default: [On] (30 seconds) • On (30 sec., 1 min., 2 min., 3 min., 5 min., 10 min.) • Off Energy Saver Mode Sets the machine to enter Energy Saver mode, Energy Saver mode 1 or Energy Saver mode 2, to reduce power consumption. The machine recovers from Energy Saver mode when it receives a print job, prints a received fax, or when the [Copy] or [Start] key is pressed. • EnergySaverMode 1 The machine enters Energy Saver mode 1 if the machine has been idle for about 30 seconds. It takes less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2. Default: [Off] • Off • On (30 seconds) • EnergySaverMode 2 300