Ricoh Aficio SP 3510SF User Guide - Page 366

9. Troubleshooting Problem Multiple sheets of paper are fed at one time. Paper gets wrinkles. The printed paper is curled. Images are printed diagonally to the pages. Solution • Fan the paper well before loading. Also make sure that the edges are even by tapping the stack on a flat surface such as a desk. • Make sure that the paper guides are in the right position. • Use supported types of paper. See p.84 "Supported Paper for Each Tray". • Load paper only as high as the upper limit markings on the paper guide. • Make sure that the friction pads and paper feed rollers are clean. See p.416 "Cleaning the Friction Pad and Paper Feed Roller". • Check that paper was not added while there was still some left in the tray. Only add paper when there is none left in the tray. • Paper is damp. Use paper that has been stored properly. See p.84 "Paper and Other Media". • Paper is too thin. See p.84 "Paper and Other Media". • If there are gaps between the paper and the paper guides, adjust the paper guides to remove the gaps. • Load the paper upside down in the paper tray. • If the paper curl is severe, take prints from the output tray more frequently. • Paper is damp. Use paper that has been stored properly. See p.84 "Paper and Other Media". If there are gaps between the paper and the paper guides, adjust the paper guides to remove the gaps. CER091 364