Ricoh Aficio SP 5100N User's Guide - Page 5
Safety Information, Safety During Operation - b & w laser
View all Ricoh Aficio SP 5100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Safety Information When using this machine, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. WARNING: • Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or otherwise damaged. • To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or screws other than those specified in this manual. • Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the following occurs: •You spill something into the machine. •You suspect that your machine needs service or repair. •The external housing of your machine has been damaged. • Do not incinerate used toner or toner containers. Toner dust might ignite when exposed to an open flame. • Disposal can take place at our authorized dealer. • Dispose of used toner containers in accordance with local regulations. • Keep the machine away from flammable liquids, gases, and aerosols. A fire or an electric shock might occur. • Connect the machine only to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extension cord. • Do not damage, break or make any modifications to the power cord. • Do not place heavy objects on it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric shock or fire. • If the power cord is damaged (exposure of the core, disconnection, etc.), contact your service representative to change a new one. Operating the machine with a damaged power cord may cause an electric shock or fire. i