Ricoh CL7200 Setup Guide - Page 191
When using the PostScript 3 Printer Driver, Printers and Faxes
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Preparing for Printing The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer model, and port. H Click [Port:], and then click [Add]. I Click [Network Printer], and then click [OK]. J Double-click the name of the NetWare file server on the network tree. The created queue is displayed. K Select the print queue, and then click [OK]. L Check that the port of the selected printer is displayed in [Port:]. M Click [Finish]. The printer driver installation starts. N Click [Finish] in the [Component selection] dialog box. O Click [Finish] in the [Introduction complete] dialog box. P In the [Printers] window, open the printer properties. Under Windows XP or Windows Server 2003, open the printer properties from the [Printers and Faxes] window. Q On the [Printer Settings] tab, clear the [Form Feed] and [Enable Banner] check boxes. Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, click the [NetWare setting] tab. Do not select these check boxes since they are automatically selected by the printer driver. If you select the check boxes, the printer may not print correctly. R Click [OK] to close the printer properties dialog box. ❒ The protocol is set to inactive as default. Enable it using Web Image Monitor or Telnet When using the PostScript 3 Printer Driver Follow the procedure below to set up the PostScript 3 printer driver. A In the [Printers] or [Printers and Faxes] window, open the printer properties. B Click the [PostScript] tab. ❒ When using Windows 2000/XP or Windows NT 4.0, click the [Device Settings] tab, and then proceed to step to clear the check box. 51