Ricoh CL7200 Setup Guide - Page 411
Using NetWare, Setting Up as a Print Server (NetWare 3.x)
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 411 highlights
Using a Printer Server Using NetWare This section describes the setting procedure for network printers in the NetWare environment. In the NetWare environment, you can connect the printer as a "print server" or "remote printer". ❖ Setting procedure • When using the printer as a print server A Installing SmartDeviceMonitor for Admin B Setting the network interface board. C Turning the printer off and then back on. • When using the printer as a remote printer A Installing SmartDeviceMonitor for Admin. B Setting the network interface board. C Setting NetWare. D Starting the print server. ❖ Using SmartDeviceMonitor for Admin To use the printer in a NetWare environment, use SmartDeviceMonitor for Admin to set the NetWare printing environment. ❒ The NetWare Client provided by Novell is required to set the printing environment using SmartDeviceMonitor for Admin under the following environments: • NDS mode in Windows 95/98/Me • NDS or Bindery mode in Windows 2000/XP, Windows NT 4.0 For details about installing SmartDeviceMonitor for Admin, see p.200 "Installing SmartDeviceMonitor for Admin". ❖ Printers listed by SmartDeviceMonitor for Admin SmartDeviceMonitor for Admin lists printers connected to the network. If you cannot identify the printer you want to configure, print configuration page, and then check the printer name. Setting Up as a Print Server (NetWare 3.x) Follow the procedure below to connect the printer as a print server using NetWare 3.x. A Log on to the file server as a supervisor or supervisor equivalent. 271