Ricoh CL7200 Setup Guide - Page 412
Start NIB Setup Tool from the, Start, Wizard, Finish, Configuration, Network
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 412 highlights
Using a Printer Server B Start NIB Setup Tool from the [Start] menu. C Click [Wizard], and then click [OK]. D Select the printer you want to configure, and then click [Finish]. A dialog box prompting you will need to perform the remaining configuration tasks in the Web browser appears. Click [OK], and then wait until Web Image Monitor starts automatically. E The dialog box for entering the user name and password appears. Enter the user name and password, and then click OK. ❒ For details about the password, consult your network administrator. F Click [Configuration] in the left area, click [Network], and then click [NetWare]. The following items are displayed: • Print Server Name: Enter the NetWare print server name. If you want to use the interface board as a print server, enter the name of a print server that is not active on the file server. 1 to 47 characters can be used. • Logon Mode: Specify whether you will designate a file server or NDS tree when logging on to NetWare. • File Server Name: When a file server name is entered here, only the specified file server is searched for. This item is mandatory. Up to 47 characters can be used. • NDS Tree: If you want to enable the NDS mode, enter the name of the NDS tree you want to log on to using up to 32 one-byte alphanumeric characters. • NDS Context Name: If you want to enable the NDS mode, enter the print server context using up to 127 characters. • Operation mode: Specify whether to use the interface board as a print server or a remote printer. • Remote printer number: This item is effective when you have specified that the interface board be used as a remote printer. Enter the same number as the number of the printer to be created on the print server, using 0 to 254 one-byte characters. • Job Timeout: When the interface board is running as a NetWare remote printer, the printer cannot judge when a print job ends. Therefore, the printer terminates printing when a certain period of time has elapsed since the last time it has received print data (i.e., when it has not received print data for a certain period of time). Specify here this period of time (3 to 255 seconds) using one-byte characters. The initial value is 15 (seconds). • Frame Type: Select the frame type to be used from the drop-down menu. • Print Server Protocol: Select the protocol to be used for NetWare from the drop-down menu. 272