Ricoh GX200 User Guide - Page 240
When [Movie] or [Landscape]
View all Ricoh GX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Problem Cause Solution Refer to Although the camera is set to auto focus, it is unable to focus. The lens is dirty. Wipe clean with a soft, dry cloth. - The subject is not in the center of Shoot with focus lock. P.45 the shooting range. It is a hard-to-focus subject. Shoot with focus lock or manual P.45 focus. P.109 Although the camera is not in focus, the green frame appears in the center of the picture display. The camera incorrectly focused Shoot with macro mode or move P.49 because the distance to the a little away from the subject. subject is too close. The picture is blurred. (The J symbol appears.) You moved the camera when pressing the shutter release button. Hold the camera with your elbows P.43 pressed against your body. Use a P.137 tripod. Use the camera shake correction function. When shooting in a dark place (such as indoors), the shutter speed slows down and pictures become easily blurred. Use the flash. Use the camera shake correction function. Raise the ISO setting. P.51 P.137 P.146 Vignetting (condition Even with the tele conversion Operate the zoom lever to set the - where the four corners lens attached, the zoom position zoom position to the telephoto appear dark) occurs is not set to the telephoto side. side. around the edges. The flash does not fire or The flash is not open. Slide the F (Flash) OPEN switch P.51 the flash cannot charge. outward to open the flash. The flash cover is not fully raised. Do not press or cover the flash P.51 cover. Also, return the LCD viewfinder to the original angle, and adjust to open the flash. The flash cannot be used in the To shoot with the flash, change P.51 following cases: the settings or mode. P.127 7 • When auto bracket, white balance bracket, or color P.128 P.130 bracket is set P.112 • In multi-shot mode P.94 • When [Movie] or [Landscape] P.151 is set in scene mode The flash is set to flash off. Open the flash. Use the F (Flash) P.51 button to cancel flash off. Battery is exhausted. When using the dedicated rechargeable battery or AAA nickel-metal hydride batteries, charge the batteries as required. When using AAA alkaline batteries or AAA oxyride batteries, replace them with new batteries. Use the AC adapter as required. P.36 P.32 P.250 Appendices 238