Ricoh MP2000SPF Operating Instructions - Page 34
p.45 Interface Settings, Reference
![]() |
UPC - 708562020183
View all Ricoh MP2000SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Connecting the Machine IEEE 802.11b (wireless LAN) This section lists the settings required for delivering data to network with IEEE 802.11b (wireless LAN). 1 For details about how to specify the settings, see "Interface Setting" and "File Transfer". Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address As required Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Interface Settings/Network Effective Protocol Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communictn. Interface Settings/Network Permit SSL/TLS Comm. Interface Settings/Network Host Name Interface Setting/ IEEE 802.11b Communication Mode Interface Setting/ IEEE 802.11b SSID Setting Interface Setting/ IEEE 802.11b Channel Interface Setting/ IEEE 802.11b Security Type As required As required As required As required Necessary Necessary As required As required As required Necessary As required As required As required Interface Setting/ IEEE 802.11b File Transfer Communication Speed Delivery Option As required As required Note ❒ In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒ If Delivery Option is set to [On], check that IPv4 Address is set. Reference p.45 "Interface Settings" p.51 "File Transfer" 26
![](/manual_guide/products/ricoh-aficio-mp-2000l-operating-instructions-089ffeb/34.png)