Ricoh MP2000SPF Operating Instructions - Page 53
Interface Settings, Network
UPC - 708562020183
View all Ricoh MP2000SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Interface Settings Interface Settings This section describes the user tools in the Interface Settings menu under System Settings. Default settings are shown in bold type. Network 2 This section describes the user tools in the Network menu under Interface Settings. ❖ Machine IPv4 Address Before using this machine in the network environment, you must specify the IPv4 address and subnet mask. When you select [Specify], enter the [IP Add.] and [Subnet M] as "xxx.xxx.xxx.xxx"("x" indicates a number). • Auto-Obtain (DHCP) • Specify IPv4 Address: 011.022.033.044 Sub-net Mask: 000.000.000.000 The default setting is Specify. The default setting for IPv4 Address is 011.022.033.044. When you select [Specify], make sure that [IP Add.] is different from that of another machines on the network. The physical address (MAC address) also appears. ❖ IPv4 Gateway Address A gateway is a connection or interchange point between two networks. Specify the gateway address for the router or host computer used as a gateway. The default setting is 000.000.000.000. ❖ Machine IPv6 Address Specify the machine's IPv6 network address. • Link-local Address The machine's specified link-local address appears. • Manual Config. Address The machine's manually configuration address appears. • Stateless address: 1-5 The specified stateless address appears. ❖ IPv6 Gateway Address Displays the machine's IPv6 gateway address appears. 45