Ricoh MP2000SPF Operating Instructions - Page 55
SMB Computer Name, SMB Work Group, Ethernet Speed, LAN Type, Ping Command, Permit SNMPv3 Communictn.
UPC - 708562020183
View all Ricoh MP2000SPF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Interface Settings ❖ SMB Computer Name Specify the SMB computer name. Enter the computer name using up to 15 characters and spaces cannot be entered. Do not set a computer name starting with RNP and rnp. Use uppercase letters for alphabets. ❖ SMB Work Group Specify the SMB work group. 2 Enter the group name using up to 15 characters. and spaces cannot be entered. Use uppercase letters for alphabet. ❖ Ethernet Speed Set the access speed for networks. Select a speed that matches your network environment. [Auto Select] should usually be selected. The default setting is Auto Select. ❖ LAN Type When you have installed the optional IEEE 802.11b interface unit, select the method of connection. The default setting is Ethernet. [LAN Type] is displayed when wireless LAN board is installed. If Ethernet and IEEE 802.11b (wireless LAN) are both connected, the selected interface has priority. ❖ Ping Command Check the network connection with ping command using given IPv4 address. If you fail to connect to the network, check the following, and then retry the ping command. • Make sure that "IPv4" in [Effective Protocol] is set to "Effective". • Check that the machine with assigned IPv4 address is connected to the network. • Check if the same IPv4 address is used for the specified equipment. ❖ Permit SNMPv3 Communictn. Set the encrypted communication of SNMPv3. The default setting is Encryption/Clear Text. If you select to [Encryption Only], you need to set an encryption password for the machine. ❖ Permit SSL/TLS Comm. Set the encrypted communication of SSL/TLS. The default setting is Ciphertext/Clear Text. If you set to [Encryption Only], you need to install the SSL certificate for the machine. 47