Ricoh SP 213SNw Setup Guide - Page 15
Printing a Configuration
View all Ricoh SP 213SNw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Printing a Configuration Page Before you install the software, print the configuration page to check the network information. SP 212w/SP 212Nw/SP 213w/SP 213Nw Turn off the power. While holding the [Stop/Start] key down, switch the power on and do not release the [Stop/Start] key until 13 seconds elapse. CTT175 Check the IP address on the configuration page. The address appears under Host Interface. If the IPv4 address is not automatically assigned by the DHCP server, the machine automatically selects an unused IPv4 address starting with "169.254.xxx.xxx" (Auto IP function). SP 212SUw/SP 212SNw/SP 212SFw/SP 212SFNw/ SP 213SUw/SP 213SNw/SP 213SFw/SP 213SFNw Press the [User Tools] key. DCT845 Press the [ ] or [ ] key to select [Print List/Report], and then press the [OK] key. Press the [ ] or [ ] key to select [Configuration Page], and then press the [OK] key. 15