Ricoh SP 3710DN Setup Guide - Page 13

Easy Setup Using the CD-ROM Using the CD-ROM supplied with this machine, you can install the driver from your computer and configure the Wireless (Wi-Fi) settings for this machine. If you intend to use this machine mainly from computers, we recommend using the CD-ROM to configure the settings. ●● The following items are necessary to set up a Wireless (Wi-Fi) connection. ●● USB interface cable Using the USB cable is needed to update the settings of this machine when it is installed or the Wireless (Wi-Fi) settings change in your environment. See Step 6 to connect your computer to this machine. ●● Router (access point) ●● CD-ROM supplied with the machine ●● To install the software, quick installation and manual installation can be used. Using the manual installation, you can specify data to be installed as you prefer. 6. Select [The machine's IP address is not configured or you want to change it.] when installing this machine. Connect your computer and this machine by using the USB cable. Select [The machine's IP address has been already configured.] when configuring the Wireless (Wi-Fi) settings for this machine is completed. 7. Follow the instructions in the setup wizard. 8. Click [Finish] in the [Setup Complete] dialog box. If the installer prompt you to restart Windows, reboot your computer. 1. Turn on your computer. 2. Insert the provided CD-ROM into the CD-ROM drive of the computer. If your computer does not have a CD-ROM drive, download a setup file from our website. or 3. Click [Quick Install]. Setup is completed. 4. The software license agreement appears in the [Software License Agreement] dialog box. After reading the agreement, click [Yes]. 5. Select [Wireless(Wi-Fi)Connection] and click [Next]. 11