Ridgid 1822-I Owners Manual - Page 4

1822-I Pipe and Bolt Threading Machine General Safety Information WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS! Work Area Safety • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • Do not operate tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. • Keep bystanders, children, and visitors away while operating a tool. Distractions can cause you to lose control. • Keep floors dry and free of slippery materials such as oil. Slippery floors invite accidents. • Guard or barricade the area when work piece extends beyond machine. A guard or barricade that provides a minimum of three (3) feet clearance around the work piece will reduce the risk of entanglement. Electrical Safety • Grounded tools must be plugged into an outlet, properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. Cover of grounded outlet box Grounding Prong Grounding Prong • Avoid body contact with grounded surfaces. There is an increased risk of electrical shock if your body is grounded. • Don't expose electrical tools to rain or wet conditions. Water entering a power tool will increase the risk of electrical shock. • Do not abuse cord. Never use the cord to pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electrical shock. • When operating a tool outside, use an outdoor extension cord marked "W-A" or "W". These cords are rated for outdoor use and reduce the risk of electrical shock. • Use only three-wire extension cords which have three-prong grounding plugs and three-pole receptacles which accept the machines plug. Use of other extension cords will not ground the tool and increase the risk of electrical shock. • Use proper extension cords. (See chart.) Insufficient conductor size will cause excessive voltage drop, loss of power and overheating. Minimum Wire Gauge for Extension Cord Nameplate Amps 0 - 6 6 - 10 10 - 12 12 - 16 Total Length (in feet) 0 - 25 18 AWG 18 AWG 16 AWG 14 AWG 26 - 50 16 AWG 16 AWG 16 AWG 12 AWG 51 - 100 16 AWG 14 AWG 14 AWG NOT RECOMMENDED • Keep all electric connections dry and off the ground. Do not touch plugs or tool with wet hands. Reduces the risk of electrical shock. Personal Safety • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medications. A moment of inattention while operating power tools may result in serious personal injury. • Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. • Avoid accidental starting. Be sure switch is OFF before plugging in. Plugging in tools that have the switch ON invites accidents. • Remove adjusting keys before turning the tool ON. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury. • Do not overreach. Keep proper footing and balance at all times. Proper footing and balance en- 2 Ridge Tool Company