Ridgid K-375R Owners Manual - Page 6
Description, Specifications and, Standard Equipment
View all Ridgid K-375R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Kollmann K-375R 1/2″ Cage Machine 10. Wear safety glasses and rubber soled, non-slip shoes. Use of this safety equipment may prevent serious injury. 11. Only use the K-375R to clean drain lines 2″ to 4″ in diameter. Follow instructions on the use of the machine. Other uses or modifying the drain cleaner for other applications may increase the risk of injury. Description, Specifications and Standard Equipment Description The RIDGID/Kollmann K-375R Drain Cleaning Machine will clean drain lines 2″ to 4″ in diameter and 50 feet in length. It is specifically designed for the rental market with a steel wire drum to allow for inspection and cleaning of the cable. The steel wire drum is belt-driven by a 1/3 HP electric motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord and a pneumatic foot actuator provides On/Off control of the motor. The drum powers a 1/2″ integral wound solid core cable that has a quick change coupling system for connecting or disconnecting tools. The cable is manually fed in and out of the drain. An integral torque limiter will cause the drum to stop rotating when excessive torque is created as the cutting tool attached to the cable hits a snag and stops rotating. Specifications Line Capacity Recommended for indoor drain lines: 2″ - 4″ lines through 50′ Drum Capacity 50′ of 1/2″ cable Motor Type 115V/60 Hz, Reversible, Split Phase Rating 1/3 HP @ 1725 RPM Amps 6.7 Weight (Machine & Cable) .......73 lbs. Length 22″ Width 13″ Standard Equipment K-375R • K-375R Drum Machine (Figure 1) • C-44 IW Cable w/solid core (1/2″ x 50′) • 1 Pair Gloves • A-13 Coupling Pin Key • T-202 Bulb Auger (Figure 2) • T-211 Spade Cutter (Figure 3) • T-205 "C" Cutter (Figure 4) • Safety & Instruction Card • Rental Checklist Card • Instruction Video Figure 1 - Machine with Gloves, Cable and Coupling Pin Key Figure 2 - T-202 Bulb Auger: Used for exploring and breaking up stoppages or returning samples to surface to determine correct tool. Figure 3 - T-211 Spade Cutter: Used to get soft grease or debris moving in the drain. 4 Ridge Tool Company