Ridgid K-75 Owners Manual - Page 11

K-75A/B, K-1500A/B, & K-1500SP Drain Cleaning Machines 4″ and 6″ Tees 3″, 4″ and 6″ Y's Figure 8 - Standard Cable Application 3″, 4″ and 6″ Ells Heavy-Duty Cable Where conditions allow, heavyduty 11/4 inch cable, such as C-14, should be used for faster results and longer cable life. The heavy-duty cables work effectively in 4″ through 8″ straight lines. (Figure 9) NOTE! This type cable should not be used in areas where 4″ "P" traps or 4″ running traps are currently in use. 6″ to 8″ Running Traps 4″ to 8″ Ells Figure 9 - Heavy Duty Cable Application 4″ to 8″ Cleanouts Faster Cleaning Obstructions of grease or fats can be cleaned faster and more effectively by bending the cable some 6″ or 8″ behind the cutter. (Figure 10) Bent Cable Figure 10 - Bending Cable for Faster Cleaning Storing And Transporting Cable ("A" Frame Models Only) Cables can be stored and transported on "A" frame models as shown in Figure 11. Figure 11 - Storing Cables On "A" Frame Models Accessories WARNING Only the following RIDGID products have been designed to function with the Sectional Drain Cleaning Machines. Other accessories suitable for use with other tools may become hazardous when used on the machines. To prevent serious injury, use only the recommended accessories. K-75A/B Machines Cables and Leaders Catalog No. 62275 30007 Model No. C-10 T-127 Description 15′ All-Purpose Wind (4.6m) 7/8″ Trap Leader 5/8″ Cables Catalog Model No. No. 51317 C-9 62270 C-8 62265 C-7 Description 10′ Heavy-Duty (3m) 71/2′ All-Purpose Wind (2.3m) 71/2′ Tight-Wind (2.3m) Ridge Tool Company 9