Ridgid K-75 Owners Manual - Page 6

K-75A/B, K-1500A/B, & K-1500SP Drain Cleaning Machines • Wear safety glasses and rubber soled, non-slip shoes. Use of this safety equipment may prevent serious injury. • Only use the K-75 to clean drain lines up to 4″ in diameter and the K-1500 machine up to 10″ in diameter. Follow instructions on the use of the machine. Other uses or modifying the drain cleaner for other applications may increase the risk of injury. Description, Specifications and Standard Equipment Description The RIDGID K-75A/B, K-1500A/B & K-1500SP Drain Cleaning Machines are for cleaning 11/4″ through 10″ lines. These machines are driven by induction motors that have a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle or rotary switch provides FORWARD/OFF/REVERSE control of the motor. Machines are designed to use sectional-type cable that has a quick coupling system for disconnecting tools. The cable is manually fed in and out of the machine and rotates at a cable speed of 600 to 700 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. K-75 machines come equipped to run 7/8″ cable to clean 2″ - 4″ lines through 175′. They can be adapted to use 5/8″ cable to clean 11/4″ to 3″ lines. K-1500 machines come equipped to run 11/4″ cable to clean 3″ - 10″ lines through 200′ - the 1500SP through 300′. They can be easily adapted to use 7/8″ cable to clean 2″ - 4″ lines. Specifications Line Capacity Depends on choice of cable. Refer to the chart for recommendations Motor: K-75A/B Type 115V/60Hz, Reversible Rating 1/2 HP Amps 7.2 K-1500A/B Type 115V/60Hz, Reversible, 230V- 240V/50Hz Versions Available Upon Request Rating 3/4 HP Amps 10.4 K-1500A/B-SP Type 115V/240V/50-60Hz, Rev- ersible, Total Enclosed Fan Cooled Rating 1 HP Amps 15 Frame: A Style 2 Wheels In Rear w/Upright Handle On Frame Assembly and Cable Storage Capacity B Style 2 Wheels In Front On Frame Assembly. See the RIDGID RT Catalog for machine model options and accessories. Every machine model includes as standard equipment: • A-1 Operator's Mitt • A-12 Pin Key • A-34-12 Rear Guide Hose Chart 1 Model No. K-75A K-75A-SE K-75B K-75B-SE K-1500A K-1500A-SE K-1500B K-1500B-SE K-1500SP K-1500SPA Frame Style A B A B B A Cable Size 5/8″ or 7/8″ 7/8″ or 11/4″ 7/8″ 11/4″ Capacity Line Reach 11/4″ - 3″ 125′ 2″ - 4″ 175′ 2″ - 4″ 175′ 3″ - 10″ 200′ 2″ - 4″ 175′ 3″ - 10″ 300′ Horsepower 1/2 HP at 640 RPM 3/4 HP at 710 RPM 1HP at 600 RPM Overall Height 411/2″ Width 203/4″ Machine Length Wt. Lbs. 16″ 88 273/4″ 203/4″ 405/8″ 76 411/2″ 203/4″ 16″ 92 273/4″ 203/4″ 405/8″ 80 273/4″ 203/4″ 405/8″ 110 411/2″ 203/4″ 16″ 138 4 Ridge Tool Company