Rocketfish RF-HTLF23 User Guide - Page 17

RF-HTLF23 STEP 6 - Option 2: Installing on a solid concrete or concrete block wall CAUTION: To prevent property damage or personal injury, never drill into the mortar between the blocks. Mount the wall plate directly onto the concrete surface. 1 Align the center of the wall plate template (07) at the height you determined in the previous step and make sure that it is level. Tape the template to the wall. Note: Mount the wall plate (08) directly onto the concrete surface (no wall covering). Minimum solid concrete thickness: 8 in. (20.3 cm). Minimum concrete block size: 8 × 8 × 16 in. (20.3 × 20.3 × 40.6 cm). Minimum horizontal space between fasteners: 16 in. (40.6 cm). 07 For concrete applications, the arm assembly (11) must remain centered in wall plate (08). Keep this in mind when selecting the wall plate location. You'll need 07 Template (1) 08 Wall plate (1) C1 Lag screw (4) C3 Concrete anchors (04) C2 Washer (04) Level Hammer 3/8" (10 mm) masonry drill bit Drill Tape 1/2" socket wrench Need help? Call 1-800-620-2790 (U.S. and Canada) 17