Rocketfish RF-RBWS02 User Manual (English) - Page 19

To charge the wireless speaker batteries: 1 Connect the AC power adapter to the wireless speaker and plug into an AC power outlet. • The CHARGE indicator blinks green (slowly) to indicate that the wireless speaker is in charging mode. • When the wireless speaker is fully charged (about 16 hours on 5000 mAh NiMH batteries), the CHARGE indicator turns solid, indicating charging is complete. • If the CHARGE indicator blinks green (quickly), it indicates that you need to replace your rechargeable batteries with new ones. Note: Make sure that the batteries are fully charged for at least 16 hours. This will guarantee a longer operating lifetime for the batteries. The wireless speaker lets you charge when it is powered on or in standby mode. The wireless speaker will play audio for up to 5.5 hours on fully charged batteries. The playing time will depend on the battery type used and the volume level of the speaker. The batteries can only be charged at a temperature between 32° and 104° F (0 to 40° C). Caution: To prevent damage, only use NiMH Rechargeable batteries when charging the wireless speaker. Connecting your wireless sender/receiver Note: Make sure that the device is located at least 18" from any WiFi router. To connect the wireless sender/receiver to an audio source and AC power: 1 Connect one end of the audio cable (supplied) to the AUDIO IN jack on the sender/receiver and the other end to the audio output jack of your device (such as an A/V receiver, PC, or iPod). (Supplied) OR To audio output jack. (Supplied) To AV receiver RF-RBWS02 19