Rocketfish RF-RBWS02 User Manual (English) - Page 21
To turn the wireless speaker on and off:, Establishing communication
![]() |
View all Rocketfish RF-RBWS02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
To turn the wireless speaker on and off: 1 When initially connecting to an AC outlet, the device automatically turns on. To turn off the device, press . The power indicator turns off and the standby indicator turns red. 2 If the wireless speaker is off, press to turn it on. The power indicator lights. Establishing communication Rocketboost products form an audio network and each Rocketboost receiver can select the audio from any Rocketboost sender in the network. Important Every Rocketboost network must contain one hub device, which helps devices join the network. The network can have only one hub, which you can enable using the hub switch on the back of all Rocketboost senders and sender/receivers. If this is your first Rocketboost product, you should make the sender/receiver the hub, if you already have Rocketboost products, you should disable hub mode on this device. Important: Hub devices must always have power for your network to operate. The hub device can be in standby (power saving) mode, but must stay plugged in. Is this your first Rocketboost product? YES - If this is your first Rocketboost enabled product, you can skip this section because your sender/receiver and speaker were previously joined or connected at the factory. To learn how to use your speakers, see "Listening to music" on page 25. Note: If you do need to rejoin the sender/receiver and the wireless speaker, see "Joining the sender/receiver to the wireless speaker" below. NO - If this is not your first Rocketboost enabled product, proceed to "Joining the sender/receiver and wireless speaker to an existing Rocketboost network" on page 23. RF-RBWS02 21
![](/manual_guide/products/rocketfish-rfrbws02-user-manual-english-17e0787/21.png)