Rocketfish RF-SBM101 User Manual (English) - Page 14
STEP 4 - Select screws, washers, and spacers, threading the screws.
View all Rocketfish RF-SBM101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
STEP 4 - Select screws, washers, and spacers 1 Select the hardware necessary for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are almost always in the holes on the back of the TV.) If you don't know the correct length and diameter of the mounting screws your TV requires, test various sizes by hand threading the screws. Select one of the following types of screws: M4 × 16 mm screws (I) M4 × 40 mm screws (P) M5 × 16 mm screws (J) M5 × 40 mm screws (Q) M6 × 16 mm screws (K) M6 × 25 mm screws (L) M6 × 40 mm screws (R) M6 × 50 mm screws (S) M8 × 40 mm screws (T) Select one of the following types of washers: M4/M5 washers (G) M4/M5 washers large (GG) M6/M8 washers (H) M6/M8 washers large (HH) For an irregular or obstructed TV back, use the spacers (N) provided. CAUTION: To avoid potential personal injuries and property damage, make sure that there are adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using a screw that is too short may cause your TV to fall from the mount. 14